how to compustar arm by itself

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44022
Printed Date: May 04, 2024 at 10:47 AM

Topic: how to compustar arm by itself

Posted By: LONELYSTAR6000
Subject: how to compustar arm by itself
Date Posted: November 29, 2004 at 2:16 AM

after i install my compustar cm3000

every thing work fine

i use program menu 1-1 unlock before, locK after starting locK after remote start

anD promgram menu 2-5 ignition controlled door lock

i am not install dome light supervision

when i press button 1 to Auto start my car

engine start and the door is lock by itself BUT ALAM NOT ARM

ON MY 2 WAY REMOTE SHOW INDICATES UNLOCKED

I NEED TO PRESS BOTTON 1 TO ARM AND PRESS BOTTON 1 ONE MORE TIME TO DISARM AND UNLOCK

THE DOOR TO ENTER CAR

MY QUESTION IT ?

HOW TO SET AUTO LOCK AND ARM AFTER REMOTE START?

AND I DON'T NEED TO PRESS ARM AND DISARM

THANK YOU

Replies:

Posted By: Velocity Motors
Date Posted: November 29, 2004 at 9:14 AM

Look on page 10 of the installation manual. Menu#2 option # 3 PASSIVE ARMING nad locking.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: LONELYSTAR6000
Date Posted: November 29, 2004 at 11:39 PM

thank you velocity motors

it work

Posted By: Velocity Motors
Date Posted: November 30, 2004 at 12:06 AM

No problemo

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA