Print Page | Close Window

Ratchet driver

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45168
Printed Date: May 03, 2024 at 2:15 PM


Topic: Ratchet driver

Posted By: bdl666
Subject: Ratchet driver
Date Posted: December 14, 2004 at 12:14 AM

I have a ratchet driver similar to this one.

But mine doesn't have the socket side only the bit side. I got mine from a cheap tools set about 10 years ago and mine is showing it's age. I have looked everywhere for one just like mine but I haven't been able to find one. This thing is great for when you have to take off speaker grills on the dash of cars that have no room betwen the dash and windshield.

Has anyone seen something like this out there? Any help will be really appreciated.



Replies:

Posted By: NowYaKnow
Date Posted: December 14, 2004 at 5:55 AM
I've seen these at sears and a few other local places.. The bit side only type. Also looks like there is some on ebay cheap.

https://cgi.ebay.com/dll?ViewItem&category=42337&item=3859215536&rd=1

https://cgi.ebay.com/dll?ViewItem&category=20769&item=4342779760&rd=1

Mike



Posted By: bdl666
Date Posted: December 14, 2004 at 10:47 AM

Thanks NowYaKnow !

             But I'm looking for one like mine. Mine only has the bit side and the other side is completely flat which is what I like about it.




Posted By: archemedes
Date Posted: December 14, 2004 at 9:10 PM
have you tried harbor freight?



Posted By: NowYaKnow
Date Posted: December 14, 2004 at 9:41 PM
A little closer...

https://www.sears.com/sr/javasr/product.do?BV_UseBVCookie=Yes&vertical=TOOL&pid=00904116000

https://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=90867

Mike






Posted By: bdl666
Date Posted: December 15, 2004 at 12:20 AM

Thanks everyone for your replies!

   Mine is made by Master Craft I got it in a cheap Master Craft tool set from Fingerhut. I did check on their site(Master Craft) but they don't have all of their tools on the site. I'll try e-mailing them to see if they still make it.





Print Page | Close Window