Door Panel Pullers?
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45279
Printed Date: May 10, 2024 at 3:37 AM
Topic: Door Panel Pullers?
Posted By: Master Asylum
Subject: Door Panel Pullers?
Date Posted: December 15, 2004 at 1:20 PM
I am trying to find something that fits this idea but have had trouble finding on exactly. Some special name to them or what? Also about how much would they cost to purchase(a rough estimate of a good to high quality brand like SnapOn)?
-------------
1998 Monte Carlo w/
Eclipse CD8454
2xRockford 5.25" Power 2-way T152C
2xRockford 6"x9" Punch 3-way FRC4369
1xMemphis 16-MCH1300 5-channel
2xKicker 12" L5 Solobaric-2 Ohm
Replies:
Posted By: vinspo
Date Posted: December 15, 2004 at 5:38 PM
Snap-on sells a set of 4 panel tools for $50.
Posted By: Master Asylum
Date Posted: December 16, 2004 at 11:14 AM
Ay link available by chance so I can get any idea as to what they look like and where exactly to find them. (I tired their online catalog and I couldn't find them.)
-------------
1998 Monte Carlo w/
Eclipse CD8454
2xRockford 5.25" Power 2-way T152C
2xRockford 6"x9" Punch 3-way FRC4369
1xMemphis 16-MCH1300 5-channel
2xKicker 12" L5 Solobaric-2 Ohm
Posted By: fuseblower
Date Posted: December 16, 2004 at 1:12 PM
Here is something that I found works. I went to the dollar store and got a small nail puller. It looks just like a screwdriver but the end is shaped like the back of a hammer.
Posted By: Master Asylum
Date Posted: December 16, 2004 at 2:01 PM
And that works, without doing any damage to the clips?
-------------
1998 Monte Carlo w/
Eclipse CD8454
2xRockford 5.25" Power 2-way T152C
2xRockford 6"x9" Punch 3-way FRC4369
1xMemphis 16-MCH1300 5-channel
2xKicker 12" L5 Solobaric-2 Ohm
Posted By: vinspo
Date Posted: December 16, 2004 at 2:17 PM
I have the set at home, I will see what the item number is and get back to you.
Posted By: flynntech
Date Posted: December 20, 2004 at 6:40 PM
I bought one at Northern tools for $2.99, it is the perfect size, I use it on all kind of stuff. I found a nice door clip puller at a nearby electronics warehouse, no more 'rag' for me! This thing holds the clip in place while it goes back in too, how did I ever get by without this thing? That costed me $8. Just keep your eyes peeled for good deals. I did buy a double ended door clip flat bar from Harbor Frieght, it sit's in the bottom of my tool box. I use it once every few months, usually not even on a car...
Posted By: Hymer
Date Posted: December 20, 2004 at 10:04 PM
Northern and tool's and more in mn has some nice cheap ones.. snap on has their blue point set (all 4 or 5 ) in sale now for $40.00 good deal... and a "zipklip" tool works great for x-mas tree style clips.... MCM i think had mine
-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair
Posted By: Master Asylum
Date Posted: December 21, 2004 at 7:33 AM
Ok, thank you. I'll keep my eyes out for that stuff when I'm not poor! =)
-------------
1998 Monte Carlo w/
Eclipse CD8454
2xRockford 5.25" Power 2-way T152C
2xRockford 6"x9" Punch 3-way FRC4369
1xMemphis 16-MCH1300 5-channel
2xKicker 12" L5 Solobaric-2 Ohm
Posted By: swamprat323
Date Posted: December 21, 2004 at 5:11 PM
Posted By: daveangell200
Date Posted: December 22, 2004 at 12:35 AM
you could also get them at any auto parts stores
|