iva-d300 installed - gap?
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45746
Printed Date: July 18, 2025 at 3:30 AM
Topic: iva-d300 installed - gap?
Posted By: deejay21
Subject: iva-d300 installed - gap?
Date Posted: December 22, 2004 at 2:43 AM
This was my very first time installing a head unit of any kind, so I am pretty please with the fact that the head unit is entirely funcitonal. It's a Christmas miracle! However, the problem I have is that there is a gap of about 1/2" above the unit when the screen is retracted. I also don't have the lower DIN with anything in it. As far as the DIN-fillers, do I have to get a specific one to basically add a little holder? And what do I do about the gap at the top? Is there a kit I can get to help? It's in a 97 Eclipse by the way. Thanks for the help!
Replies:
Posted By: foltzy
Date Posted: December 22, 2004 at 7:49 AM
go to your local best buy or circuit city and get a dash kit for $20..thats all you need
zack
Posted By: jeffchilcott
Date Posted: December 23, 2004 at 12:57 AM
sounds like you got the wrong dash kit. Go back to where you got it and tell them its the wrong one, and have them look up a new one, there is a metra guide on here that should give you the right code for the metra kit to get
-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
|