Print Page | Close Window

touch button 4x4

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45961
Printed Date: May 12, 2025 at 11:06 AM


Topic: touch button 4x4

Posted By: dfx91
Subject: touch button 4x4
Date Posted: December 25, 2004 at 2:20 AM

I am wondering why my 4x4 on demand touch button system will not engage the 4 wheel drive on my 1992 Ford Explorer?
Can anyone give me any ideas of what to test or connections that might need to be checked or in general what the problem maybe. Thank you

-------------
Keith K.



Replies:

Posted By: Hymer
Date Posted: December 26, 2004 at 10:41 PM
There is a solenoind on the xfer case (i think) thats usually what causes these probs... if I remember they are a real pain to get at... It's been a while though... pushbutton 4x4 sucks.... give me a twin stick atlas anyday...

-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair



Posted By: dfx91
Date Posted: December 30, 2004 at 4:05 PM
thank you for the insight and info. I have this bad feeling it's the solenoid that's bad. Got a new switch and tested everything today. Seems to be that greater of two evils which is much more expensive. Again thank you

-------------
Keith K.



Posted By: IMAGE6902
Date Posted: December 30, 2004 at 11:18 PM

there may be a solenoid control module on that truck, I know the newer ones have them. I'd hate to see you get a solenoid and that still not be it. check it out



-------------
I tell it like it is...


Print Page | Close Window