Print Page | Close Window

95 Pathfinder tach wire hookup

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46872
Printed Date: May 05, 2024 at 7:11 AM


Topic: 95 Pathfinder tach wire hookup

Posted By: fastbike
Subject: 95 Pathfinder tach wire hookup
Date Posted: January 04, 2005 at 12:05 PM

I installed a bulldog remote starter in a 1995 Pathfinder.  It works but it is hard starting.  The diagram I have shows the tach wire to be hooked to the white wire at the ECCS.  I can't fid the white wire.  An alternative is to hook the tach wire to the negative side of the coil.  I did this and programmed the remote for tach mode but the vehicle still has a hard time starting .  It takes about 6 attempts before it will sputter and finally start.  Can anyone tell me a better location for the the tach wire hookup or where to find the white wire at the ECCS.  The distributer cover says ECCS but there is no wire there.  Please help a guy out.



Replies:

Posted By: KarTuneMan
Date Posted: January 04, 2005 at 2:58 PM
The astrochart shows the tach as being a blue wire at the coil....?  MAYBE  ?

-------------





Print Page | Close Window