Try to figure this one out!

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48187
Printed Date: July 07, 2025 at 5:35 AM

Topic: Try to figure this one out!

Posted By: dr_d69
Subject: Try to figure this one out!
Date Posted: January 20, 2005 at 1:02 PM

I have been working on this 2003 mustang gt for the last 2 months, the car was bought from california as a rebuild and shipped to BC Canada for repair.

I am almost done the car and need to install Daytime Driving Lights for federal inspection. The problem is there is no module plug on the car and i really do not want to buy a new harness for the car, so does anyone have any ideas ?

help please

Replies:

Posted By: forbidden
Date Posted: January 20, 2005 at 1:10 PM

Wire the fog lights to the ignition line. They will be on whenever the key is in and turned to on, thus daytime running lights. Should get you passed your VI, chances are it is a box 1 VI that you will have to pass and most shops will not know the difference between a fog light and a daytime running light. My 93 MR2 uses the fog lights as daytime running lights as standard equipment.

-------------
Top Secret, I can tell you but then my wife will kill me.

Posted By: dr_d69
Date Posted: January 20, 2005 at 1:34 PM

no i just talked to the inspection facility and unless the fog lights came as factory driving lights they wont accept that.

and the stock canadian module wont work because the harness is different ( no pigtail plug for the module)

aftermarket driving light kit maybe be best way to go.

Print Page | Close Window