4ch interconnects

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48597
Printed Date: May 16, 2025 at 10:12 PM

Topic: 4ch interconnects

Posted By: vlamz24
Subject: 4ch interconnects
Date Posted: January 25, 2005 at 7:57 PM

Is it possible to splice together rca cables, I was doin gan install and pulled to hard on my 4 channel rca and pulled one set out of of what looks to be the connection point where the wire goes from one to four. Any help? I think I am screwed

Replies:

Posted By: mobilevt
Date Posted: January 26, 2005 at 1:55 PM

Not really, these cables are made to be the way they are, alter them in any way and the signal will degrate. Just chalk it up as a learning experience and buy another set of cables. If you pulled one set, chances are there will be other weak & broken connections anyway.

Sean

-------------
Emergency Vehicle Technician
Got Freedom? Thank a vet!

Posted By: auex
Date Posted: January 26, 2005 at 4:38 PM

I would say it depends on whether or not it can be repaired. If they are cheap 1 piece rcas then no. If they are more expensive rcas that you can take apart then yes I would fix them.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: vlamz24
Date Posted: January 26, 2005 at 4:54 PM

I'll jst replace them thank everyone

Print Page | Close Window