Tach Install Problem 04 Accent

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51475
Printed Date: May 20, 2024 at 5:11 PM

Topic: Tach Install Problem 04 Accent

Posted By: 04Hyundai
Subject: Tach Install Problem 04 Accent
Date Posted: March 07, 2005 at 7:20 PM

I have hooked up a Summit tach in my 04 Accent. I tapped the grey wire pin #8 off of the ECU for my signal. The tach does work but it doesnt read the same as my stock tach any ideas why?

Replies:

Posted By: Thetruth
Date Posted: March 07, 2005 at 8:42 PM

I had a similar problem with my 2003 accent i had a Sunpro guage and had the same problem mine had a difference of arounb 300 rpms between the two. I taped into the gray wire behind the guage cluster but its the same thing. I think i had the problem because i had a cheap guage.

Print Page | Close Window