Voltage Stabilizer

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55643
Printed Date: May 06, 2024 at 5:09 AM

Topic: Voltage Stabilizer

Posted By: Betkers
Subject: Voltage Stabilizer
Date Posted: May 13, 2005 at 5:22 AM

Hi all, I am new here. This is my first post here and I hope you guys can help me. Recently I try to DIY a voltage stabilizer which is connected to the car battery. But during my research, I found that there's lots of different diagram. Some have more than 50 capacitors but some only got 3 caps! So, which is more precise and what's the best circuit for the stabilizer? Thanks

Replies:

Posted By: Francious70
Date Posted: May 13, 2005 at 9:39 AM

Depends on what SIZE caps your using.

Paul

Posted By: Betkers
Date Posted: May 14, 2005 at 8:14 AM

4700 uF (3pieces), 3300 uF (3pieces), 1000 uF (8 pieces). Total = 32000 uF
parallel...

OR

One cap for each range? Which means 3 caps connect in parallel.

Which is the most effective?

Print Page | Close Window