Item w/Bubbles In Between Glass?
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57069
Printed Date: May 09, 2025 at 11:26 PM
Topic: Item w/Bubbles In Between Glass?
Posted By: snsperformance
Subject: Item w/Bubbles In Between Glass?
Date Posted: June 04, 2005 at 11:16 PM
I went to a car show and I saw a bunch of cars with these things either in the trunk or even one in someones hood. Its made of glass I guess 2 pieces, and it has bubbles in between the glass. They are also lighted with either red or blue or glass. I've been trying to find out what this things are called but no one knows what they are called. Please help.
-------------
2002 Sentra Spec-V: AEM, UR, HS, Greddy, G2, MTX, Grafxworks, Eurolite, Sprint, TWM, MOMO, Mobil 1, ES, SenDel, Toyo, DieHard, Sylvania, 20% tint, Alpine, Clarion
Replies:
Posted By: Blowntweeters
Date Posted: June 05, 2005 at 1:52 PM
ive seen them 2 i dont know anymore abnout them than you do at this point
-------------
1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700
Posted By: 12V_REP
Date Posted: June 05, 2005 at 2:51 PM
Bubble walls? All it is is plexi, usually baby oil, fish tank air pumps and some lighting. Most places make them, and I have yet to see them as prefab for a car. Check Spencers Gift or Sharper Image for the larger home decor ones. They were big about 10 years ago and are making a comeback.
-------------
Posted By: snsperformance
Date Posted: June 05, 2005 at 4:13 PM
Are there any kits out there that you can assemble?
-------------
2002 Sentra Spec-V: AEM, UR, HS, Greddy, G2, MTX, Grafxworks, Eurolite, Sprint, TWM, MOMO, Mobil 1, ES, SenDel, Toyo, DieHard, Sylvania, 20% tint, Alpine, Clarion
Posted By: 12V_REP
Date Posted: June 05, 2005 at 4:50 PM
Not that I am aware of. If you think it through you could probably design one yourdself. All you need is the items I listed above, plus the hose I forgot to mention to go from the pumps to the supply line at the bottom of the wall. All in all you are building a box with about 3/4 inch depth between the front wall and back wall.
Bubble Wall-------------
Posted By: snsperformance
Date Posted: June 05, 2005 at 4:52 PM
12V_REP wrote:
Not that I am aware of. If you think it through you could probably design one yourdself. All you need is the items I listed above, plus the hose I forgot to mention to go from the pumps to the supply line at the bottom of the wall. All in all you are building a box with about 3/4 inch depth between the front wall and back wall.
Yea it seems easy enough. How do you power the pump though? Is that just run to a power converter in the car? ------------- 2002 Sentra Spec-V: AEM, UR, HS, Greddy, G2, MTX, Grafxworks, Eurolite, Sprint, TWM, MOMO, Mobil 1, ES, SenDel, Toyo, DieHard, Sylvania, 20% tint, Alpine, Clarion
Posted By: 12V_REP
Date Posted: June 05, 2005 at 4:53 PM
Check the link I just added to my above post.
-------------
Posted By: 12V_REP
Date Posted: June 05, 2005 at 4:55 PM
Yes, you would just run an inverter to the pump. I know I have dealers that build these a couple times a year for different installs. They are not too hard, but time consuming more than anything.
-------------
Posted By: snsperformance
Date Posted: June 05, 2005 at 5:05 PM
12V_REP wrote:
Yes, you would just run an inverter to the pump. I know I have dealers that build these a couple times a year for different installs. They are not too hard, but time consuming more than anything.
A local shop said $500-$600 per and I want two.  ------------- 2002 Sentra Spec-V: AEM, UR, HS, Greddy, G2, MTX, Grafxworks, Eurolite, Sprint, TWM, MOMO, Mobil 1, ES, SenDel, Toyo, DieHard, Sylvania, 20% tint, Alpine, Clarion
|