Screws in Speaker Box

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57385
Printed Date: May 10, 2025 at 4:31 AM

Topic: Screws in Speaker Box

Posted By: Walkercustoms
Subject: Screws in Speaker Box
Date Posted: June 09, 2005 at 7:01 PM

Is it ok to use screws when but the box together? I also used brads and glue and caulk.

Replies:

Posted By: auex
Date Posted: June 09, 2005 at 7:50 PM

It is fine/recommended. Just pre drill for screws to prevent cracking. You still need to use glue and silicone, not caulk, to seal the box.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: speedwayaudio1
Date Posted: June 10, 2005 at 6:08 AM

Screws work well, I like staples and Gorilla glue. I like to coat the seems on the inside with spray on bed liner.

-------------
Big Dave

Print Page | Close Window