MECP basic level test

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57897
Printed Date: May 14, 2025 at 10:34 PM

Topic: MECP basic level test

Posted By: jcassonjr
Subject: MECP basic level test
Date Posted: June 17, 2005 at 12:18 PM

I am looking to take this test in the next couple of weeks and I was wondering what things i should hammer on and what i can just study the very basics of. Is the any thing on the test I sould or should not worry about. What about definitions.

-------------
Alpine cda-9855
Alpine Mrd-m1000
1 farad digital Rockford cap
2 Treo SSi 12's
Large centerport box

Replies:

Posted By: sinfulpain
Date Posted: June 17, 2005 at 5:49 PM

Know The Ohms LAW!!!

Posted By: auex
Date Posted: June 17, 2005 at 6:59 PM

Ohms law and voltage drops through a circuit. The other parts are easy.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: jcassonjr
Date Posted: June 17, 2005 at 9:51 PM

define the other parts

-------------
Alpine cda-9855
Alpine Mrd-m1000
1 farad digital Rockford cap
2 Treo SSi 12's
Large centerport box

Posted By: auex
Date Posted: June 17, 2005 at 10:00 PM

Other parts= general knowledge(intro to mobile electronics) and technique+shop safety. I am sorry but if you fail shop safety you are a moron, not you specifically but in general.

Concentrate on the first portion of this.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Print Page | Close Window