Print Page | Close Window

2000 Silverado

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5823
Printed Date: May 20, 2024 at 7:59 PM


Topic: 2000 Silverado

Posted By: petriej
Subject: 2000 Silverado
Date Posted: November 24, 2002 at 11:03 AM

Has anyone used the auxillary output of an alarm to hook up the seat heaters.?




Replies:

Posted By: PLAYER69
Date Posted: November 24, 2002 at 11:09 AM

Yes, you have to go into both doors, disassemble the switches, and hook a relay to each side of the switch.  I think I have pictures if you need.  Very easy.




Posted By: bigdawg tx
Date Posted: December 01, 2002 at 8:38 PM

Yes, that works well with the remote start engaged. I have a 2002 silverado with a compustar 2000AS. The ouput I am using switches the seat warmer on only when the remote start has the igniton powered up, when you cut the remote start, or it times out the seat turns off too, beautiful. Now im trying to figure out the cargo light on another output, but I can't break down that switch far enough to perform the operation described above. Probably going to be along the lines of a timed relay triggered from the (-) pulse from my output. When I figure it out I will put it up.



-------------
bigdawg tx


Print Page | Close Window