How to wire a 2 amp system

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=598
Printed Date: August 24, 2025 at 11:43 AM

Topic: How to wire a 2 amp system

Posted By: lauvers
Subject: How to wire a 2 amp system
Date Posted: May 04, 2002 at 11:09 PM

I have

a sony xm-2100g xplod amp and a Punch 100 amp,

2- 12" xplode swubs 2 xplode 6x9 2 xplode 5" speakers

Can anybody recommend the best way to wire this system?

-------------
Coaches Corner

Replies:

Posted By: BIGProbe
Date Posted: May 06, 2002 at 11:17 AM

What are the specs for the amps?

Posted By: NyxBass
Date Posted: May 07, 2002 at 7:06 PM

From what I can tell, the sony is a 100x2 amp, and the punch a 25x2. I would run the Sony for the subs, bridged into a 2 ohm load. I would run the front speakers off of the Punch, and the rear speakers off the head. That should use your power the best way possible.

-------------
/NyxBass

Print Page | Close Window