alarm hook up

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6018
Printed Date: May 16, 2024 at 3:37 AM

Topic: alarm hook up

Posted By: clyde
Subject: alarm hook up
Date Posted: November 28, 2002 at 10:10 PM

Hello people, I need help with a alarm hook up on a 2000 durango.It have a keeyless entry . I want to know what type of door lock system it has, 3 wire or 5 wire. Do I need to add relays? Do I add resistors for the door locks, and finaly I want to hook up a fuel cut off ,any help would be appreciated

ANDY

-------------
clyde gokool

Replies:

Posted By: SOUND PRESSURE
Date Posted: November 28, 2002 at 10:30 PM

https://www.the12volt.com/installbay/detail.asp?info=alarm&year=2000&make=Dodge&model=Durango&ID=17614&type=Alarm

-------------
Sound Pressure

You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!

Posted By: djfearny2
Date Posted: November 29, 2002 at 7:35 PM

you need to find the lt green orange wire in the drivers kick panel. this is a one wire door lock system or multiplex, you need to use relays set up for a negative trigger , meaning pin 85 is possitive input from alarm pin 30 is your output 87a not used, pin 87and 86 ground. when you activate door locks on alarm it will through a negative trigger out of the relays. on the lock wire going to lt GREEN/ orange wire you need a 647 ohm resistor and on the unlock wire you need a double pulse 1562 ohm resistor and needs to be set to double pulse unlock or willnot unlock. door locks also arm and disarm factory alarm. the resistors dont have to be exact they have to be inrange. this info is from techsoft deis website for advanced installers.

-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.