Getting wire into Dodge Ram doors

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6049
Printed Date: May 03, 2024 at 10:36 PM

Topic: Getting wire into Dodge Ram doors

Posted By: giff
Subject: Getting wire into Dodge Ram doors
Date Posted: November 29, 2002 at 10:03 PM

Any tricks on getting new speaker wire through the rubber tube that bridges the gap between the door and the car?

Replies:

Posted By: Velocity Motors
Date Posted: November 30, 2002 at 12:18 AM

You have to take the door panel off and pull the rubber boot off from the door and the body so the rubber boot is dangling on the wires. You will be able to see light from outside when you do this ( from inside the cab ) and you can run new wires through the door and into the boot and then through the cab.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window