Print Page | Close Window

2002 subaru wrx auto starter trouble

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6189
Printed Date: July 23, 2025 at 12:40 AM


Topic: 2002 subaru wrx auto starter trouble

Posted By: dm2222
Subject: 2002 subaru wrx auto starter trouble
Date Posted: December 03, 2002 at 4:01 PM

I have an auto starter in my WRX and I want to know how I can get it to work with the factory alarm.  The auto starter can trigger the door lock/ unlock, but it does not arm/ disarm the alarm.  As of last year, no one could answer this.  I am hoping someone has an answer by now.



Replies:

Posted By: securinu
Date Posted: December 03, 2002 at 6:13 PM
pull the door panel if the key activates the alarm otherwise it might be internal to the factory module . in which case may not be possible all my info has is lock /unlock no arm disarm info.



Posted By: NismaX
Date Posted: December 03, 2002 at 8:15 PM
You cannot disarm the factory alarm system in these cars.  You might as well install an aftermarket system that has an alarm in it too.  

-------------
Jon



Posted By: TheShadowWRX
Date Posted: December 04, 2002 at 1:07 PM

You can do it, if you have the upgraded subaru alarm.

There are a few threads on it at www.nasioc.com

Mike




Posted By: dm2222
Date Posted: December 04, 2002 at 5:42 PM
How do I know if I have the upgraded system?  If I have it, How do I wire in to it?



Posted By: netZ
Date Posted: December 05, 2002 at 5:38 PM

if you have a siren attached to the passenger side strut tower, then you do have the subaru factory alarm upgrade...

if you need help with your setup, definitely go to: www.nasioc.com/forums someone should be able to assist you...

netZ

 

Quote: Originally posted by dm2222 on December 04, 2002

How do I know if I have the upgraded system?  If I have it, How do I wire in to it?


Print Page | Close Window