Going out to work on an NSX
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61971
Printed Date: May 13, 2025 at 3:00 PM
Topic: Going out to work on an NSX
Posted By: BoominRolla
Subject: Going out to work on an NSX
Date Posted: August 24, 2005 at 2:11 PM
Anyone have any tips? I was told remove the vinyl trim then unbolt the door pannel and then the screws around the weather stripping and it just pulls off? any suggestions...
-------------
Replies:
Posted By: BoominRolla
Date Posted: August 24, 2005 at 4:56 PM
the door was one of the easiest ones i've ever pulled off!!!
-------------
Posted By: auex
Date Posted: August 25, 2005 at 12:24 AM
Don't try to remove the small plastic surrounding the lock rod, it is $80.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: BoominRolla
Date Posted: August 27, 2005 at 6:41 PM
everything for this car is INSANELY EXPENSIVE!!!!!!!!!!!!!!!!!! trunk liners (carpet) $400+ on ebay a small bracket behind the head light housing $300 a corner blinker lense measuring about 3"x1" $180!!!!!!!!!!!!!!!!!!!!!!!!!! Its unreal good thing the car is in better shape now... How would you put a radio in this car? we're thinking about using some hzemall liquid plastic and molding an iso din mount cd player/am/fm radio... but we're not sure if thats the only way or not? then it looks like we'd have to run new wires into both front doors... then under the dash as well... it says in the maid xl program that the rear speakers are in the center console between the seats... I heard speakers under the dash what are those? fronts also??
-------------
|