cutting glass

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63129
Printed Date: May 15, 2024 at 8:34 PM

Topic: cutting glass

Posted By: placid warrior
Subject: cutting glass
Date Posted: September 23, 2005 at 1:53 AM

i was wondering if anyone knew how to cut class (car window glass) i have a pillarless window and i have to cut the glass...i would like to avoid having to take it out and bring it in if possible. are there any attachments for the angle grinder that could work...scoring it by hand would take forever.

Replies:

Posted By: Velocity Motors
Date Posted: September 23, 2005 at 7:59 AM

Windshield glass is tempered.Fully tempered and heat-strengthened glass cannot be cut after tempering.

Go to this site formore information: https://www.newportglass.com/temper.htm

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: placid warrior
Date Posted: September 23, 2005 at 2:37 PM

allright, thanks jeff...to cut it i'd have to stress relieve the glass...definately not a home job and totally not worth it...I'm going to have to figgure something else out. Thanks again.

Posted By: wranglercory
Date Posted: September 27, 2005 at 3:14 PM

have it professionaly done

Print Page | Close Window