Quick flash blinkers
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64886
Printed Date: May 10, 2025 at 4:52 AM
Topic: Quick flash blinkers
Posted By: MestizoRacer310
Subject: Quick flash blinkers
Date Posted: October 23, 2005 at 1:44 PM
There was a relay that was sold a few years ago that you can install in the place of the OEM hazard relay that allows the user to adjust how fast/slow they want their turn signals to blink. However, I haven't been able to find the relay anywhere and have "found" that I could just modify the OEM hazard relay, using a different sized capacitor OR resistor. I just want to double check to see which one it is...
-------------
Kevin
'02 Acura TL Type S & '98 Accord EX-L Sedan
Replies:
Posted By: fingaz22
Date Posted: October 24, 2005 at 9:26 AM
i cant help with that aftermarket flasher but if you lower the resistance in the curcuit from the bulbs than you will get a faster blink. like when one of your blinkers is out and it speeds up to warn you. same thing a bad bulb mean lower resistance. that my opinion dont know how too do it though never had too. so let use know what you come up with. lol
-------------
JUST ONE MORE AMP!!!
hu,alpine cva 1005/dva 5205
sound processor,symmetry(first one).
sub amp,power 1000 the terminator.(1992).
subs,spl comp dual 1 ohms.
punch 150hd on a 10" ev.
alotofhighs
|