need help with install

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=656
Printed Date: August 26, 2025 at 3:42 PM

Topic: need help with install

Posted By: Am pM HooDluM
Subject: need help with install
Date Posted: May 08, 2002 at 5:41 PM

need help with install with 91 Jeep Cherekee......battery on passenger side...and can't find a way through firewall.....anyone know where i can get through

Replies:

Posted By: NyxBass
Date Posted: May 08, 2002 at 6:51 PM

If you really can't find a grommet, you can always drill. Make sure that there is nothing on either side you are drilling. Use a grommet so that the wire won't get cut goign through.

-------------
/NyxBass

Posted By: Static Revenger
Date Posted: May 08, 2002 at 8:13 PM

There is a factory grommet or two on the firewall.Saddly though I don't think you will get a very big gauge power wire through it as it's already stuffed with all sorts of factory wiring.

So do as NyxBass suggested and drill you a hole.Use either a drill bit or a uni-bit taking your time as to make sure not to hit any other wires,vacum lines and such obstructions,then grommet it to protect the wire and to seal the hole from any possible moisture.

Posted By: Am pM HooDluM
Date Posted: May 09, 2002 at 7:44 AM

thanks guys

Posted By: Static Revenger
Date Posted: May 09, 2002 at 8:33 AM

No problem bro

Print Page | Close Window