Diagram & Drawing Programs

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71297
Printed Date: May 02, 2024 at 1:31 AM

Topic: Diagram & Drawing Programs

Posted By: techguy688
Subject: Diagram & Drawing Programs
Date Posted: January 22, 2006 at 7:00 PM

I have noticed several different diagram drawings that have been posted. Which software program does everyone use? What program does the "the 12 volt" use in the nice relay and diode drawings on this site. posted_image

-------------
Just because you've done something for a long time doesn't mean you're any good at it.
Cable Ties Rock!

Replies:

Posted By: the12volt
Date Posted: January 22, 2006 at 7:05 PM

https://www.the12volt.com/installbay/forum_posts.asp?tid=188

-------------
posted_image

the12volt • Support the12volt.com

Posted By: techguy688
Date Posted: January 22, 2006 at 8:15 PM

Thanks for the link. I searched the site but couldn't find it. I have used Visio, but havent found a smaller program to use.

-------------
Just because you've done something for a long time doesn't mean you're any good at it.
Cable Ties Rock!

Posted By: the12volt
Date Posted: January 22, 2006 at 8:29 PM

You're welcome. As I said in that post, I used Microsoft Paint (which you already have if you're running Windows) to draw all the diagrams on this site.

-------------
posted_image

the12volt • Support the12volt.com

Posted By: techguy688
Date Posted: January 23, 2006 at 6:43 AM

yeah I got it, paint.net is good too. I was asking other members what they use. posted_image

tx

-------------
Just because you've done something for a long time doesn't mean you're any good at it.
Cable Ties Rock!

Posted By: firstrax
Date Posted: January 23, 2006 at 7:53 AM

I use Protel DXP. Its a complete design suite. Schematic capture, circuit simulation and PCB router.

Print Page | Close Window