looking for a keyless system for special project

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=725
Printed Date: September 05, 2025 at 4:23 AM

Topic: looking for a keyless system for special project

Posted By: HotRod53F100
Subject: looking for a keyless system for special project
Date Posted: May 12, 2002 at 2:21 PM

I'm looking for a keyless system that holds the outputs high as long as you hold down the button. This may or may not be common, I assumed that someone out there will know. I'm trying to do a project on my street rod that will remotely operate my hydraulit tilt hood and I need a system that will work as described. Does anyone have any info on where I can find such a unit? Thanks,

-------------
HotRod

Replies:

Posted By: Big Dog
Date Posted: May 13, 2002 at 1:01 PM

Hey HotRod,

The output you're looking for is a Validity Output. Quite a few companies have this feature. Myself I opt for DEI's stuff like for example the Valet 410. This output lasts as long as your finger is on the button but times out at 23 seconds, just press again for more time. Guys use 'em for wheelchair ramps and stuff. Don't go for latched as this can be dangerous if it doesn't respond right away.

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Print Page | Close Window