i just installed a commando remote starter in my car a 2000 civic it was equipped with the factory keyless entry but the remote starter has one in it too i hooked everything up but i cant figure out how to get the doors to lock with the new remote i get them to unlock but not to lock theres a wire that i didnt hook up its 12V output positve where is this suppose to go? thanks
| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|white |+ |ignition harness |
| STARTER|BLACK/ white |+ |ignition harness or *1 |
| IGNITION|BLACK / YELLOW |+ |ignition harness |
| SECOND IGNITION|yellow |+ |ignition harness |
| ACCESSORY|WHITE/ black |+ |ignition harness |
| POWER LOCK|GREEN / WHITE |- |keyless entry module *2 |
| POWER UNLOCK|GREEN/ orange |- |keyless entry module *2 |
| LOCK MOTOR|WHITE/ red | |drivers kick panel |
| UNLOCK MOTOR|blue/red | |drivers kick panel |
| DISARM DEFEAT|yellow/red | |keyless entry module *2 |
| PARKING LIGHTS +|RED / black | |keyless entry module *2 |
| HEADLIGHTS| | | |
| DOOR TRIGGER|lt. GREEN/ red |- |OEM alarm plug *3 |
| DOME SUPERVISION|same as doors | | |
| TRUNK/HATCH PIN|blue/black |- |OEM alarm plug *3 |
| TACHOMETER|blue | |test connector *4 |
| SPEED SENSE| | | |
| BRAKE WIRE|GREEN / WHITE |+ |brake switch |
| HORN TRIGGER|gray |- |OEM alarm plug *3 |
| WIPERS| | | |
| LF WINDOW UP/DN|RED / yel - RED / blu |A |drivers door switch |
| RF WINDOW UP/DN|blu/yel - blu/org |A |drivers kick panel |
| LR WINDOW UP/DN|grn/yel - green |A |drivers kick panel |
| RR WINDOW UP/DN|yellow - yel/grn |A |drivers kick panel |
Notes:
*1 In 6 pin white plug behind fuse box *2 The keyless entry module is white in color, and located in the drivers kick panel. *3 The OEM alarm plug is to the right side of the steering column. The plug is green. *4 Drivers side fire wall under hood in a 2 pin plug
The lock wires are (-) trigger so you don't need any special relays or anything. You should be able to just hook up the lock wires from the Commando to the Civic and get keyles entry from the new remote. Make sure that the wires are connceted properly ( soldered and taped ) and post your results.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA