Print Page | Close Window

Problem with RF Input Cable

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73676
Printed Date: May 17, 2024 at 9:18 PM


Topic: Problem with RF Input Cable

Posted By: altimadave
Subject: Problem with RF Input Cable
Date Posted: February 28, 2006 at 4:23 PM

As I was finishing up a cd changer install I accidently put a screw through my rf input cable. It practically ripped it into. Can this wire be joined back together. If so what is the best way. Thanks.



Replies:

Posted By: cayuga420
Date Posted: February 28, 2006 at 8:06 PM
Usually you can get lucky and just solder them back together. I've done it many times.


Print Page | Close Window