97 toyota avalon radio wiring

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74091
Printed Date: November 04, 2025 at 3:20 AM

Topic: 97 toyota avalon radio wiring

Posted By: rellik201
Subject: 97 toyota avalon radio wiring
Date Posted: March 07, 2006 at 3:29 PM

can anyone help me i need to find out the color codes for my factory radio, i have searched everyware and still can't find it, i have also checked on the tech page of this website and it just gives me the codes for the non amplified system. I need to color codes for the amplified system, if anybody can help it would be greatly appreciated.

Replies:

Posted By: geepherder
Date Posted: March 07, 2006 at 6:36 PM

What are you trying to do?

-------------
My ex once told me I have a perfect face for radio.

Posted By: rellik201
Date Posted: March 09, 2006 at 3:59 PM

i'm trying to wire in a new radio but i can't seem to find the power wire colors.

Posted By: tex12gage
Date Posted: March 09, 2006 at 4:09 PM

Doing it without a harness?

-------------
TEX

Posted By: mad550
Date Posted: March 09, 2006 at 4:35 PM

blue / YELLOW = Batt + Grey = Acc+ Brown = Ground - BLACK/ Red = Ant +

-------------
WOW Sight and Sound
Maroochydore
Nothing is impossible!
Do it right the first time or don't do it at all.

Posted By: geepherder
Date Posted: March 09, 2006 at 7:41 PM

You can pick up a harness at the store that will plug right into your vehicle (Wal-Mart even carries them). Then you simply match the wire colors on this harness up to the wires on your new stereos harness and you're done.

-------------
My ex once told me I have a perfect face for radio.

Posted By: datspeed77
Date Posted: March 29, 2006 at 2:31 PM

Actually if you have an Avalon there is a harness you can buy for the amplified system. It's made by American International the model is TWH-14. The only thing you need is front and rear amplifier output in order for the harness to work. It takes your amplifier input wires and converts it to low level through the RCA's.

Print Page | Close Window