i installed ct 3100 prostart remote starter into a '99 windstar.i would like to know which wire to use to turn the radio off when you turnthe vehicle off with the remote. the radio nomally stays on after the ignitionis turned off until you open the door. is this in the ignition or radio? what color and where is this wire. what type of trigger - or +.lastly i cannot find the wire that triggers the parking lights it isn't the one noted on the diagram page. what color and where is this wire located? the headlight switch is easily accessable.the remote works fine otherwise. thanks brokecam
-------------
brokecam
The park lights wire is found at the switch. BLACK/ Light geen(-). This vehicle has a resistered park light system. you must use a relay to activate the parking lights. Pin 85 to ground. Connect the white parking light wire from the alarm to pin 86. Find the BLACK/ light green at the switch and cut it. Connect the switch side to pin 87a. Then connect pin 30 to the other side. Finally connect 87to a 1.2k resistior and the other end of the resistior to ground. Let us know how it works for ya. Good luck. Brian
You can pulse the door trigger wire from an AUX channel if you have or if your RS unit has a pulsed after RS, use this wire to pulse the door trigger so that it thinks that the door was opened.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA