2002 Grand Marquis Trunk Release

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=7521
Printed Date: May 01, 2025 at 6:15 PM

Topic: 2002 Grand Marquis Trunk Release

Posted By: mp19934
Subject: 2002 Grand Marquis Trunk Release
Date Posted: January 02, 2003 at 3:05 AM

Supplying +12v to purple / YELLOW at the 5 pin connector under the drivers kick panel results in a blown fuse in my supply wire. Do I have to cut the wire and lose the door release switch to use the remote trunk pop? thanks.

Replies:

Posted By: brianh
Date Posted: January 02, 2003 at 7:35 AM

the wire you nedd is the Violet / YELLOW at the trunk release switch.. You will need a relay to activate this function. Pins 87 and 86 go to a 12 volt constant wire. When you find the trigger wire cut it(Violet/ / YELLOW)put the soilinoid side on pin 30. Then put the switch side on pin87a. Finally get the trunk release wire from the alarm (gray) and put it on pin 85. That should keep you from blowing any more fuses. Good luck, Brian

Posted By: mp19934
Date Posted: January 02, 2003 at 2:45 PM

many thanks, Brian.

Mike

Print Page | Close Window