I have a question, and its weird cause i cannot find any pics to show you what i am talking about.. now bare with me.. on your door the window..
You know how on one side there is slider that prevents water and **** to get in to the door and its like a groove for the window, you can take that piece off so you would have a gap between the door and the window, now when putting the piece back in between the window and the door, it wont stay there are metal pieces shaped like a traingle.
Ive tried bending the piece both ways it wont stay, there are no grooves in the door so it can hold.. im thinking an epoxy? any suggestions or solutions? it would be greatly apprecaited
Thank you
You sure there are no little metal clips that hold to the trim panel, they would normally attach to the trim panel and the whole assembly would slide into place. Gluing may not be a good idea as what would happen if your had to remove the panel again for any reason.
-------------
WOW Sight and Sound
Maroochydore
Nothing is impossible!
Do it right the first time or don't do it at all.
nothing man, i checked inside the door, no holes no nothing , im thinkin that the metal sticks out and thats how it holds its place? i have no idea, i tried the epoxy.. didnt work ;s
pictures...digital camera.... regular camera with photo CD when you develope it... something man, come on
-------------
fiberglass reminds me of peanut brittle... but fiberglass tastes better!
i posted before i have no idea where it went to, so if it comes after disregard thsi post..
but long story short i figured out the problem. it stays on the door panel itself not the metal
thank you for your responses everyone i appreciate it