2006 Silverado Wiring Diagram
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79111
Printed Date: April 24, 2024 at 8:04 AM
Topic: 2006 Silverado Wiring Diagram
Posted By: nawlinjoe
Subject: 2006 Silverado Wiring Diagram
Date Posted: June 14, 2006 at 9:50 AM
I'm in need of the wiring Diagram for the Courtesy Lamp Supply Voltage for a 2006 Silverado. I want to tap into the courtesy lamp supply voltage to connect my outside mirrors lamps ( puddle lights) so that they come on the same time with my dome lights.
Replies:
Posted By: nawlinjoe
Date Posted: June 15, 2006 at 12:21 AM
Anyone, please
Posted By: wishboneattack
Date Posted: June 23, 2006 at 2:15 PM
Dome light: gray/black (+) wire @ BCM, black plug, pin E. The BCM (Body Control Module) is under the driver side dash.
Or you could do a relay off the door triggers to trigger the lights on the mirror when you open the doors.
Door triggers: gray/black (D), BLACK/ white(P) (-) each door module in each door. On base model trucks, the door trigger wires are in the lt. blue plug at the BCM, pins B4 and A5.
On 4dr trucks, the LR door trigger is lt. blue/black, pin A3, and the RR is lt. GREEN/ black, pin A2. They are in the purple plug at the BCM.
Use all wires and diode isolate.
Good Luck!
-------------
I may be lost but I am making good time.
|