Momo problem
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79365
Printed Date: May 25, 2024 at 10:16 PM
Topic: Momo problem
Posted By: jude007
Subject: Momo problem
Date Posted: June 20, 2006 at 12:07 PM
Sorry if this is not the right forum , I tried Vortex but still no answer. I got a momo boss for my golf mk2 and it has one wire and a copper bottom. I also got a momo wheel which came with a boss not for my golf. It has a plastic ring that has a copper bottom and a slot to connect the two wires from the horn. I need to connect the horn somehow to the golf boss? Without using the plastic ring. The original wheel has two wires the feed into the solid base of the wheel. The momo has a slot for a earth next to another slot, probably live and it also has a slot for another wire around the horn push. Its probably another earth so i plugged the wire into it but the horn doesn't work.
-------------
Mark2 Golf Gti 8v
Replies:
Posted By: jude007
Date Posted: June 20, 2006 at 12:10 PM
Yeah the sorry the horn does work with the key in but it goes off constantly. A little distracting to say the least :(
-------------
Mark2 Golf Gti 8v
Posted By: jude007
Date Posted: June 20, 2006 at 12:50 PM
OK I done it, thanks neway
-------------
Mark2 Golf Gti 8v
|