Print Page | Close Window

Batteries

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=80924
Printed Date: July 05, 2025 at 11:04 AM


Topic: Batteries

Posted By: craziethug5057
Subject: Batteries
Date Posted: July 29, 2006 at 12:26 AM

hi there Im newbie here

                                     anyone cud share some knowlege on how to wired up (2) 12volts battries?

my situations is:   let say i got  2 12volt batteries

                            batt 1 wired up (-)lead to batt 2 (-) lead

                            batt 2 wired up (+)lead to batt 2 (+) lead

my questions is: was the output will produce 24v or still 12v?

                            had anyone try on this?

                            any rezult?

is it gonna still produce 12 volt? if yes please holer at me!



-------------
Crazie thug 5057



Replies:

Posted By: josh1979
Date Posted: July 29, 2006 at 12:28 AM

you will still have 12V you just gain more current



-------------
bring back the rotary phone so i dont have to press 1 to proceed in english




Posted By: spookiestylez
Date Posted: July 29, 2006 at 12:30 AM
if the negatives and the positives are the same(++ - -) then thats called parellel and its still going to be 12v......if it were + - + - it would be in series , and would be 24v

-------------
RTFM




Posted By: craziethug5057
Date Posted: July 29, 2006 at 12:33 AM

Thanks very much but wat about the amperage and wattage will it increase?

Was this perfect for hardcore audio setup?

 



-------------
Crazie thug 5057




Posted By: craziethug5057
Date Posted: July 29, 2006 at 12:41 AM

ok one final last questions;

          so if i wired up

                                             setup 1

                             batt 1(+)lead  to batt 2 (+)lead                      and

                             batt 1(-)lead  to batt 2 (-)lead   =         will produce 12v?

                                              setup 2

                             batt 1(+)lead  to batt 2 (-)lead                      and

                             batt 1(+)lead  to batt 2 (-)lead   =         will produce 24v?

was the setup 1 is best for hardcore car audio?

im using 12volt electric car all wirings are in 12volt

was the amperage and wattage increase if using the setup 1?

                

           



-------------
Crazie thug 5057




Posted By: spookiestylez
Date Posted: July 29, 2006 at 12:43 AM
simple answer, setup 1 is what you want!

-------------
RTFM




Posted By: craziethug5057
Date Posted: July 29, 2006 at 12:53 AM

spookiestylez wrote:

simple answer, setup 1 is what you want!

thanks man rilyl apreciate ur help



-------------
Crazie thug 5057




Posted By: craziethug5057
Date Posted: July 29, 2006 at 12:54 AM

spookiestylez wrote:

simple answer, setup 1 is what you want!

thanks man rilyl apreciate ur help



-------------
Crazie thug 5057




Posted By: spookiestylez
Date Posted: July 29, 2006 at 1:15 AM
no problem, good luck on your install

-------------
RTFM





Print Page | Close Window