Grounding Issue

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8167
Printed Date: May 08, 2025 at 10:10 AM

Topic: Grounding Issue

Posted By: Tribal_Dog
Subject: Grounding Issue
Date Posted: January 15, 2003 at 6:30 AM

I am installing some neons in my front bumper on a metal brace there. I plan to drill a hole and sand some paint off and use this for my ground.

Is this ok??? This is an area that can get wet...will that effect the ground???

thanks

Replies:

Posted By: brianh
Date Posted: January 15, 2003 at 11:41 AM

It might effect is some. What you can do is take some silicone cualk and cover the head of the screw with it to keep the water off the connection. That should help on the possible rust problem. Good luck. Brian

Print Page | Close Window