Print Page | Close Window

97 camero factory security light

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8352
Printed Date: August 31, 2025 at 2:04 AM


Topic: 97 camero factory security light

Posted By: jjaudio
Subject: 97 camero factory security light
Date Posted: January 19, 2003 at 8:10 PM

I did an install today ,and the guy said that he didn't like the fact that the factory security light stayed on in the  dash. can anyone help me out??



Replies:

Posted By: auex
Date Posted: January 20, 2003 at 7:54 PM

Is it the one on top of the dash or is it the one in the instrument cluster?  The one on top of the dash is for a factory installed alarm and the one in the instrument cluster then it is for passlock/security.  If the customer really wants the one in the instrument cluster to be turned off you can just pull out the light bulb that illuminates it (if it has the light bulb).  To get rid of the other one you will need a plug for it or you might need a new vent if it is incorporated into the vent.



-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.


Print Page | Close Window