1988 Crown Vic fuse panel

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8812
Printed Date: May 15, 2024 at 9:23 PM

Topic: 1988 Crown Vic fuse panel

Posted By: Peregrin
Subject: 1988 Crown Vic fuse panel
Date Posted: January 30, 2003 at 5:34 AM

I install a new stereo and now the dashboard lights don't work. Okay, I probably blew a fuse. But where's the fuse panel? Either the driver was never meant to change a fuse, or a previous owner did some extensive (and poor) rewiring. Or, perhaps I'm just blind.

Okay, so where's it supposed to be? I can work from there.

Replies:

Posted By: Velocity Motors
Date Posted: January 30, 2003 at 8:04 AM

Fuse panel is either in the glove box or try checking the kick panels. It will be behind a plastic cover.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: The Buzz
Date Posted: February 11, 2003 at 10:53 PM

Should be under the cover panel under the steering column. You will need to take out 2 screws to get it off.. I did an alarm yesterday in a 87 Vic and that is where it was.

Print Page | Close Window