Wiring a JDL-PK?

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9097
Printed Date: June 22, 2025 at 5:05 AM

Topic: Wiring a JDL-PK?

Posted By: flashbang
Subject: Wiring a JDL-PK?
Date Posted: February 05, 2003 at 10:59 AM

I am going to order a Jeep Cherokee Bypass/Interface Combo Kit (JDL-PK) for my '02 Jeep.

My question is (as basic as this seems) the wiring on the ten pin connector wires. Are the inputs to be connected to the Jeeps -door lock input, - unlock input, etc. or connect these inputs from the remote starter harness?

Thanks for any help.

Replies:

Posted By: PLAYER69
Date Posted: February 05, 2003 at 11:28 AM

The inputs are from the remote starter. I am not familiar with this particular bypass but it most likely only has one connection to the vehicle other then power and ground. The other one will be to the data link connector.

Posted By: flashbang
Date Posted: February 05, 2003 at 12:10 PM

Thanks for help.

print of the JDL-PK https://www.12voltdirect.com/manual/JDL-PK_01.pdf

So, then I do not have to search for the wires in the Jeep for the dome light, power lock/unlock etc..

If I understand you correctly I would just connect my remote starter/alarm wires to the JDL-PK

Commando RS-560 car alarm/starter combo print https://www.commandocaralarms.com/manuals/RST-560install.pdf

Posted By: PLAYER69
Date Posted: February 05, 2003 at 1:06 PM

Right :)

For the dome light you will likely have to hook it up.

Print Page | Close Window