Print Page | Close Window

displayboard switching system

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91201
Printed Date: May 12, 2025 at 10:53 AM


Topic: displayboard switching system

Posted By: nfms11
Subject: displayboard switching system
Date Posted: March 02, 2007 at 3:18 PM

i would like to know wat kind of switching system is good but also cheap at da same time for a display case



Replies:

Posted By: h2oskierfl
Date Posted: March 10, 2007 at 8:41 AM
I just did a system from audio authority a few months ago. They have everything you would ever need. The instructions that come with it need some work, but tech support was very helpful walking me through some of the gray areas. We just did the basic push button system for 12 decks, 12 pair speakers, 8 amps, and 8 sub outputs for around 4 grand.




Posted By: da1duce
Date Posted: April 22, 2007 at 12:58 PM
doea ant other comp sell them??

-------------
solo installer
LONNIE




Posted By: h2oskierfl
Date Posted: April 22, 2007 at 1:53 PM
I believe fusion might still do displays.




Posted By: speakermakers
Date Posted: April 30, 2007 at 12:01 AM
I would look for a used MTI switching system. They have been around for years, last forever, and they make a million upgrades and replacement parts for them. They are so good that up until not to long ago they offered a life time warranty. Also their support is awesome and you will find many people on this page that are familiar with any hook up issues that you might run into.





Print Page | Close Window