Print Page | Close Window

speedo not working

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91846
Printed Date: August 31, 2025 at 5:33 AM


Topic: speedo not working

Posted By: slowfire01
Subject: speedo not working
Date Posted: March 18, 2007 at 8:10 PM

hello everyone, i have a custom fiberglass cluster in my sunfire and its a 2.2 auto, i have a problem, my cyberdyne aftermarket speedo isnt reading speed, it says that it will calibrate between 1,000 and 20,000 pulses per mile, i have tried tapping to the dark green and white stripe wire in the back of the harness on the cluster but thats not giving me a reading of speed so do i tap to the vss wire i used for my navigation?? my vss wire reads 4,000 pulses per mile but i know there are 2 vss wire in the car i am thinking that i have to tap to the one for my navi, which is the k pin in the cruise, any suggestion??

thnaks

jason



-------------
intersts provoke installs



Replies:

Posted By: Velocity Motors
Date Posted: March 19, 2007 at 8:49 AM
What year Sunfire is this ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window