96 Town & Country

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=926
Printed Date: September 12, 2025 at 12:29 PM

Topic: 96 Town & Country

Posted By: Ohmz
Subject: 96 Town & Country
Date Posted: May 24, 2002 at 8:08 AM

I am aware of the one wire lock/unlock wire. I need to know the resistance I need to lock/unlock. Thanks....

-------------
My Personal Installer Note: Connectors are easy, neat, and professional. But do you know how to crimp properly?

Replies:

Posted By: Velocity Motors
Date Posted: May 24, 2002 at 9:09 AM

Power Lock:		Wht/Red	WHITE/ DK. GREEN	BLACK 14 PIN CONNECTOR
Power Unlock:		Yel/Red	SINGLE WIRE SYSTEM	IN DRIVER'S KICK PANEL ****

Chyrsler/Dodge Mini Van Single Wire Door Locks Diagram. ***** Wire Located at BCM in Connector Closest to the Kick Panel; A Negative Pulse Through A 665 Ohm ResistorDisarm and Unlock the Doors and A Negative Pulse Through A 4020 Ohm Resistor Will Arm and Lock the Doors.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: the12volt
Date Posted: May 24, 2002 at 9:19 AM

Hi Ohmz, try these values, 249 ohms to unlock and 1.5K ohms to lock.

posted_image

the12volt

Posted By: the12volt
Date Posted: May 24, 2002 at 9:20 AM

Errrr, hate when that happens :)

Posted By: Velocity Motors
Date Posted: May 24, 2002 at 9:22 AM

I know what you mean posted_image