Hi. I have a friend with a 2000 Tacoma and it has factory alarm and factory keyless, whats the best way to add a remote start and keep those features, second does anyone have the diagrams for it, thanks in advance, also how does a tacoma install vs. a dodge stratus install because that is the only vehicle i have installed a remote start in and wannna see how difficult the tacoma will be thanks
| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|white |+ |ignition harness |
| STARTER|black |+ |ignition harness |
| IGNITION|BLACK / YELLOW |+ |ignition harness |
| SECOND IGNITION|BLACK/ red |+ |ignition harness |
| ACCESSORY| | | |
| POWER LOCK|RED / white |- |drivers kick panel |
| POWER UNLOCK|RED / yellow |- |drivers kick panel |
| PARKING LIGHTS +|green | |bottom of fuse box |
| PARKING LIGHTS -|RED / black | |white plug at column |
| HEADLIGHTS|red |- |white plug at column |
| DOOR TRIGGER|BLACK/ white |- |top/rear of fuse box*1 |
| TACHOMETER|black | |igniter or cluster *2 |
| SPEED SENSE|GREEN/ orange |4 |ECM behind glove box |
| BRAKE WIRE|GREEN / WHITE |+ |brake switch |
| HORN TRIGGER|GREEN/ red |- |steering column |
| WIPERS|blu/blk - yel/blu |+ |steering column |
| LF WINDOW UP/DN|blu/grn - blu/yel |A |drivers switch |
| RF WINDOW UP/DN|RED / grn - RED / blk |A |drivers switch or kick panel|
Notes:
*1 Two pin plug, top rear of fuse box. *2 igniter is located on the right side of engine compartment for V6 and on the left side for the 2.4L 4 cylinder. On the 2.7L 4 cylinder it will be located at the ECM behind the glove box or at the cluster.
-------------