astroflex 1100 programming

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93521
Printed Date: May 02, 2025 at 5:56 AM

Topic: astroflex 1100 programming

Posted By: albertatech
Subject: astroflex 1100 programming
Date Posted: May 01, 2007 at 7:17 PM

I am trying to program a new remote to an AstroFlex 1100 and am running into some problems. If someone has a copy of the install manual or could direct me to a site where I can find it I would greatly appreciate the help.

Thanks.

Replies:

Posted By: Hymer
Date Posted: May 02, 2007 at 11:05 AM

ground the hood pin wire, [or open the hood if you have a pin switch] turn the ign on hit the brake, then cycle the key three times [park lites should flash]hit start button on ALL the remotes to be programed [park lites will flash for each remote] then hit the brake, unground or close the hood and try to start the car..

-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair

Print Page | Close Window