As i was installing it yesterday I noticed that after the majority of the wires were connected the system began to Arm itself after a little bit I read in the owners manual that this is a programmed feature and can be removed. well i havn't had time to get into it and remove it. The siren Has been disconnected because i don't really wanna make the neighbors mad while i'm installing it. Well I noticed that when the alarm goes "off" or in Panic Mode. the acual Computer makes a lot of Clicking Noises. Is this normal? I'm assuming it's a relay inside. Because i can also hear a relay under my hood Clicking with the Parking lights. Also one more question it's probably pretty dumb. But included in my Kit was a relay. I've read the instructions and i can not figure out were the relay goes? I'm knowlegable about electronics and wiring but not a genious i have a simi working knowlege of it. The only reason i am not having anyone install it for me is that they wanted about 200 bucks and would not install the remote start because i have a Manual Transmission..
i would like to have the wiring diagram.
thanks.
steve.figura@mindspring.com
I have the same alarm it clicks when the lights flash i believe it to be a relay. For example if i pull the negative terminal off the truck and put it back on it will click twice and the lights will flash twice.