Print Page | Close Window

Help! Push button starter install!

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9978
Printed Date: June 07, 2025 at 8:00 AM


Topic: Help! Push button starter install!

Posted By: DriFTeR - X
Subject: Help! Push button starter install!
Date Posted: February 23, 2003 at 9:56 PM

Okay i've been working on this for a long time.  I can't seem to get this push button starter to work on my '95 nissan 240sx.  I think i'm just not wiring the rely that came with the starter button correctly.  I was just wondering if anyone knows how to install a push button starter without using the relay?  thanks!!




Replies:

Posted By: Fred Berge
Date Posted: February 24, 2003 at 12:00 AM
It would be a good idea to use the relay.
the 12 volt has a section covering relay's, check it out. If you dont want to use it, all the switch does
is complete the circuit. Find the ignition wire splice and install switch inline.

-------------
crucial



Posted By: Velocity Motors
Date Posted: February 24, 2003 at 5:04 PM
The vehicle has 2 starter wires that you have to bypass with the relay.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window