2008 ford focus cruise control

Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106422
Printed Date: May 02, 2025 at 4:17 AM

Topic: 2008 ford focus cruise control

Posted By: smcshark
Subject: 2008 ford focus cruise control
Date Posted: July 29, 2008 at 8:27 AM

Does any know if these can be done and with what system?

-------------
Automotive Electronic Specialist

Replies:

Posted By: zziggy
Date Posted: August 02, 2008 at 10:12 AM

I sure get a LOT of calls and Hits for that car for Cruise Control.

Perhaps someday there will be one.

Its SILLY for the car companies to not offer us their switches etc to install, ALA The furd and dodge PU trucks. They make $ selling us the switches and their customer doesn't bad mouth those SOB car companies like they are doing with the new GM trucks.

PEDAL PULLS are UGLY, and just NOT a solution on a $20,000 + vehicle!

Posted By: sparkie
Date Posted: August 26, 2008 at 8:33 PM

They can be done as a pedal pull. Some have a VSS and others you need to install a magnetic pick-up speed sensor on the drive shaft. These aren't for the amateur, as there are a number of issues to deal with.

-------------
sparky

Posted By: streethptuning
Date Posted: May 04, 2009 at 10:20 AM

i found a good magnetic one from aplace for about $80.00 their contact info is:

jto@gleike.net

-------------
jay-t

Print Page | Close Window