cruise control diagram

Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111228
Printed Date: May 01, 2025 at 10:38 PM

Topic: cruise control diagram

Posted By: pgilley
Subject: cruise control diagram
Date Posted: February 01, 2009 at 6:36 PM

When attempting to access info for cruise controls the info for alarms always appears. Why doesnt the cruise control info work?

Replies:

Posted By: i am an idiot
Date Posted: February 01, 2009 at 9:36 PM

And the type of vehicle is?

Posted By: pgilley
Date Posted: February 02, 2009 at 2:33 PM

i am an idiot wrote:

And the type of vehicle is?

2007 Tundra / 5.7 engine

Posted By: i am an idiot
Date Posted: February 02, 2009 at 6:16 PM

Speed Sense GREEN/ ORANGE (AC) AT MODULE BEHIND GLOVEBOX

Tach Signal BLUE/WHITE AT ECM BEHIND GLOVE BOX

Brake Light GREEN / WHITE (+) AT SWITCH ABOVE PEDAL OR IN DKP

It has been many years since I installed a cruise control, but as far as I remember it should need Power, Ground, Brake switch, Emergency brake, speed sense and Tach. The alarm page here had all of the above posted info. What other wires do you need to find?

Posted By: jermar
Date Posted: May 27, 2009 at 11:58 AM

I'm looking for a wiring diagram for cruise control on a 1980 Cadillac Seville diesel

Print Page | Close Window