Print Page | Close Window

ccs 100 compatability

Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113687
Printed Date: May 01, 2025 at 5:04 PM


Topic: ccs 100 compatability

Posted By: jdbocade
Subject: ccs 100 compatability
Date Posted: May 08, 2009 at 1:29 PM

Is the Audiovox ccs-100 aftermarket cruise control compatible with my 2006 Dodge Caravan? The van is equipped with a 3.3 litre v6 and has an automatic transmission. If it is compatible where can I find the wiring diagrams for the 2006 Caravan?

-------------
M-GoBlue



Replies:

Posted By: nikko0213
Date Posted: May 30, 2009 at 8:16 PM

M-GoBlue

Only way you can use that CCS-100 in your vehicle is by putting magnets on it.  The reason why you have to use that is cause the VSS speed pulse on that vehicle is 38,600 pulses and the CCS100 only goes to 8000 pulses.  If you decide to go with the CCS100 you will have to set it up for 2000 pulses cause of the magnets so switch 1&2 will be set off.  Make sure you put switch 3 on.  If you dont want to use a CCS100 there's anothor cruise you can use it's made by Rostra.  Below I listed the parts you will need.

250-1316 (Cruise Unit)

250-4369(Signal Generator)

250-4184(Throttle Adaptor)

250-3421(Dash Mount Switch)

Here's a link to there website:  https://rostra.com/cruise-control.htm

Hope this helps you out.

Nick


Print Page | Close Window