2000 camaro v6 cc won’t work

Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123247
Printed Date: May 01, 2025 at 12:40 PM

Topic: 2000 camaro v6 cc won’t work

Posted By: jfmmck
Subject: 2000 camaro v6 cc won’t work
Date Posted: August 25, 2010 at 12:11 PM

I removed the drive train (3.8 L & 4L60E) including PCM, wiring and steering column from a 2000 Camaro and installed in my 50 Chevy pickup. I can't get the cruise control to work. I have a wiring diagram and have run every wire from the PCM, speed sensor, (accelerator pedal), engine, brake pedal, and CC switch. All are connected correctly. Does anyone have a suggestion as to why the CC won't work and what can I trouble shoot?

Jamie

-------------
Jamie

Replies:

Posted By: icearrow6
Date Posted: August 25, 2010 at 12:28 PM

Was the unit tested before you removed it from the camaro?

-------------

Posted By: jfmmck
Date Posted: August 25, 2010 at 8:30 PM

The car was wrecked, with 605 miles and a salvage title, so I did/couldn't drive it. It is a drive by wire set up and everything but the cruise controll works. The only part not installed in my truck is the instrument panel which does have a "cruise light". Any sugestions would be appreciated.

-------------
Jamie

Print Page | Close Window