2004 silverado no cruise
Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123397
Printed Date: May 03, 2024 at 7:47 AM
Topic: 2004 silverado no cruise
Posted By: bro7of7
Subject: 2004 silverado no cruise
Date Posted: September 07, 2010 at 1:21 PM
I installed a factory handle on a 04 silverado with a 5.3 motor.I get no cruise light and the cruise doesn't work.
Everything should be installed properly,this isn't my first rodeo.I have had fresh "eyes" check the 4 wires . everything is correct.
I also tried an aftermarket handle ,as I have installed them before that way. Still no light or cruise hook up.....
I have checked fuses,I have brake lights...what else???
Replies:
Posted By: Velocity Motors
Date Posted: September 07, 2010 at 7:49 PM
What part number is the handle that you have ? There are two handles available, one for the vans and one for the trucks.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: i am an idiot
Date Posted: September 07, 2010 at 10:47 PM
Does the vehicles computer not need to be programmed with the cruise option?
Posted By: Velocity Motors
Date Posted: September 08, 2010 at 10:13 AM
Not on this body style 1500 truck. Only the 2007.5+ requires programming.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: bro7of7
Date Posted: September 08, 2010 at 3:31 PM
@VM
Printed on handle GM12450067
would wire colors be the same??
|