2008 f350 cruise no working
Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127267
Printed Date: April 24, 2024 at 12:59 PM
Topic: 2008 f350 cruise no working
Posted By: lmb welding
Subject: 2008 f350 cruise no working
Date Posted: May 08, 2011 at 8:49 PM
hey all i was wundering if anyone has had problems... mine is not working and not sure where too start... i check the fuses and they are all good.. now where too look???
Replies:
Posted By: davep.
Date Posted: May 28, 2011 at 12:50 AM
Diesel or Gas? If Diesel, there's a hydraulic switch on the master cyl for the cruise. The switch is closed with brakes released. I've had trouble with two of these switches on Diesels.
If Gas, I have not a clue on a F350.
Posted By: nikolayp80
Date Posted: December 25, 2014 at 12:40 AM
Have you ever figured out the reason why the cruise control wouldn't turn on? I git 2008 Ford-F350 and I'm having same problem. The motor is 5.4L gas.
Posted By: davep.
Date Posted: December 27, 2014 at 2:25 AM
Holy thread necro. This was a response I made on the day I joined. There have been developments in the meantime.
There was a massive recall regarding the hydraulic switch on the master cyl that affected about 30 million Fords. The "fix" was a harness with very low amp fuses in it that would protect the wiring if the switch developed a short. This harness is installed adjacent to the switch, and plugged into the existing wiring and switch.
The 2008 F350 was eventually included in this recall. Check both fuses in the add-on harness. Use a VOM, as the fuse element is too small to reliably eye-ball.
|